Prolimatech Megahelms unboxing+installing+OCCT test

[Skywalker777]

Maybe try applying the paste the way mentioned by AS-5, horizontal line method for C2Q cpu?

 

[mostwanted]

ok i reinstalled the cooler,this is what happen to the paste

Uploaded with ImageShack.us

Uploaded with ImageShack.us

this time i followed the instructions on AS site..simple horizontal line and i didnt spread it.


Uploaded with ImageShack.us

and here are the results





Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

so what u guys say??

 

[AFQ]

Temps are better now, you had alot of paste applied.

 

[Pleasant]

Are these temps on 1.49 vcore :O ??????????????
I think its Great

 

[Lord Ammar]

You bought a very mediocre cooler I'm afraid. 60 degrees is just way too much for a cooler that size. I got 70 on my E6750 with a stock cooler and thermal paste completely worn off.

 

[HMS1193]

Are these temps on 1.49 vcore :O ??????????????
I think its Great

Its 1.39 V core........

 

[Pleasant]

You bought a very mediocre cooler I'm afraid. 60 degrees is just way too much for a cooler that size. I got 70 on my E6750 with a stock cooler and thermal paste completely worn off.

and how about cooler like Noctua DH 14

http://wccftech.com/2009/12/12/noctua-nhd14-cpu-cooler-review/4/

 

[Lord Ammar]

I dont know about the i7. I'm comparing a Q6600 with a E6750 which are similar in thermal standards. My load temp @ 3.3Ghz is 52-53. I'm pretty sure even if I take it to 3.6 it wont go into the 60s. And my idle temp is 31 degrees

 

[AFQ]

Its not about the size of cooler. Venomous X is way smaller than NH-D14 and gives only 0.5C to 1C higher temperatures.

Megahelms is one of the best coolers.

It must be mounting method or something. I think he is applying too much paste.

---------- Post added at 11:04 PM ---------- Previous post was at 11:03 PM ----------

I dont know about the i7. I'm comparing a Q6600 with a E6750 which are similar in thermal standards. My load temp @ 3.3Ghz is 52-53. I'm pretty sure even if I take it to 3.6 it wont go into the 60s. And my idle temp is 31 degrees

How can you compare a quad with a dual core?
I know they are both 65nm but still, they are way different if we talk about the heat they produce.
and Q6600 is notorious for the heat it produces.

 

[Pleasant]

@ ammar if Noctual Shooting 60 to 70c from 32c why this cant go From 42 to 65

Noctua Dh14 is one of the best cooler

One More thing Dont take it wrong i am not fighting here just discussing In typing u cannot tell in which Tone ur Talking

 

[sunny945]

very good yaar
congratz on your purchase
your pc looks cool

 

[Skywalker777]

Looks good to me, give it 200hrs runtime or around a week to set in.
For our weather, and the chip oc'd the results look fine to me. Anything under 70c for an oc'd chip is good enough in my opinion

 

[Lord Ammar]

@ ammar if Noctual Shooting 60 to 70c from 32c why this cant go From 42 to 65

Noctua Dh14 is one of the best cooler

One More thing Dont take it wrong i am not fighting here just discussing In typing u cannot tell in which Tone ur Talking

LOL i'm not fighting or anything. I'm just a little vary of the temps of the Q6600. Maybe Blade can tell us more. He has a Q6600 with a Z600

 

[Pleasant]

LOL i'm not fighting or anything. I'm just a little vary of the temps of the Q6600. Maybe Blade can tell us more. He has a Q6600 with a Z600

To me It Looks Fine at This VCORE considering Quad and Summer rest some senior members could ponder over it

 

[mostwanted]

Its 1.39 V core........

its 1.375 vcore

---------- Post added at 12:04 AM ---------- Previous post was at 12:01 AM ----------

Looks good to me, give it 200hrs runtime or around a week to set in.
For our weather, and the chip oc'd the results look fine to me. Anything under 70c for an oc'd chip is good enough in my opinion

yes im goign to wait for a week to see if there is any difference..

---------- Post added at 12:05 AM ---------- Previous post was at 12:04 AM ----------

You bought a very mediocre cooler I'm afraid. 60 degrees is just way too much for a cooler that size. I got 70 on my E6750 with a stock cooler and thermal paste completely worn off.

i dont think so these results are from a mediocore cooler..im sure im doing somthing wrong here maybe too much thermal paste or maybe im not mounting it right..

Uploaded with ImageShack.us

---------- Post added at 12:09 AM ---------- Previous post was at 12:05 AM ----------

core 1 and core 2 and giving high tems and core3 and 4 are giving low temps..almost 5 to 6 degree difference between 1,2 and 3,4...whats the cause?

 

[Pleasant]

Btw i dont really believe on every gora review what ever the product they have to review usually outperforms against other product
when i was buying hyper212plus i saw some reviews it was outprforming than v8 with singl fan setup and in some reviews it was just fine
so dont really rely some much on reviewes results as they have different ambients and depends on case air flow etc

 

[rameez]

nice purchase bro... everything looks awesome and nice photography.

 

[Jadefox]

Green and orange looks awesome

 

[mostwanted]

ok guys after checking what went wrong i think i got the problem, i ran occt for 20mins just to check the temps and here is the result.

Uploaded with ImageShack.us

what u guys say?

 

[Pleasant]

These are awesome its Getting better and Better
u said u rectified the problem so what was the problem

and the Test u Posted is it with LINPACK ?????