Prolimatech Megahelms unboxing+installing+OCCT test

[Skywalker777]

Congrats, thats a really good cooler. Those are decent temperatures, plus AS5 needs a 200hr time period to break in so it's hopefully going to get better day by day.
Nice rig, though I second the opinion that a black interior of casing would give the orange an even much better look.
What did you use to clean the cpu's old thermal residue?

 

[OmMeE]

Congrats... Apart from the GREEN... everything rocks!!

 

[Voodoo]

congratulation brother for purchasing one of the best cpu coolers at the moment
beautiful taken pictures,
could you please tell the below:-
your Q6600 is G0 or B3 stepping?
Q6600 VID?
your Room temperature during OCCT testing?

i hope that the results will be improved, because AS5 takes around 200 hours to give full performance

 

[Pleasant]

200hrs usage of pc require or as5 will do the job ur pc is switchd of ?
in other word will take aprox 4days

---------- Post added at 10:41 AM ---------- Previous post was at 10:37 AM ----------

200hrs usage of pc require or as5 will do the job ur pc is switchd of ?

 

[digitalism]

Ala cooler u got there man. One of the best atm. Congratulations

 

[Pleasant]

Sure it is
these coolers everywhere online when we talk about good coolers
noctua dh14
Venemous x
megahelm
true 120

 

[ovaisaijaz]

Congrtaz dear

 

[AFQ]

200hrs usage of pc require or as5 will do the job ur pc is switchd of ?
in other word will take aprox 4days

---------- Post added at 10:41 AM ---------- Previous post was at 10:37 AM ----------

200hrs usage of pc require or as5 will do the job ur pc is switchd of ?

It only settles down when processor is being loaded after different intervals of time.

 

[Faddi]

really nice stuff congrats

 

[mostwanted]

Congrats, thats a really good cooler. Those are decent temperatures, plus AS5 needs a 200hr time period to break in so it's hopefully going to get better day by day.
Nice rig, though I second the opinion that a black interior of casing would give the orange an even much better look.
What did you use to clean the cpu's old thermal residue?

thanx bro, i used a simple tissue paper to clean it..

---------- Post added at 01:16 PM ---------- Previous post was at 01:13 PM ----------

congratulation brother for purchasing one of the best cpu coolers at the moment
beautiful taken pictures,
could you please tell the below:-
your Q6600 is G0 or B3 stepping?
Q6600 VID?
your Room temperature during OCCT testing?

i hope that the results will be improved, because AS5 takes around 200 hours to give full performance

thanx bro..q6600 is GO revision and stepping is B and VID is 1.3000v

---------- Post added at 01:17 PM ---------- Previous post was at 01:16 PM ----------

thanx guys..ill be doing push pull after jumma nimaz. then ill post the results

 

[Voodoo]

hmm, try to clean it with Alcohol cleaner, which is available at every medical store

your VID is not bad,

what was room temp. while running OCCT?

 

[Skywalker777]

Push/Pull should make a significant difference.
Simple tissue with water or what since the its stuck on the cpu and something with alcohol content is recommended to clean it properly without leaving any micro residue?

 

[HMS1193]

The HSF and Case look nice with those Xigi fans.. But the results are like

 

[mostwanted]

ok guys i installed a 2nd fan and the results are :crying::crying:.........im sure i have done somthing wrong during installation..i ran occt for 30mins (i thought it was for 30 mins but it was running for 60mins so i cancelled it after 30mins) and im not sure whats the room temp but temp inside cas as shown on zalman fan controller were 38 36 37 39.so room temp should be arround 40..
right here are the results..:crying:

Uploaded with ImageShack.us
Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Uploaded with ImageShack.us

so what u guys suggest? should i reinstall the cooler?

 

[Lord Ammar]

yes you should reinstall it. maybe its not properly touching the CPU surface

 

[Voodoo]

i don't think there is anything wrong with your cooler installation
this is an expected result with nowadays weather

 

[mostwanted]

yes you should reinstall it. maybe its not properly touching the CPU surface

when i was placing the cooler over the cpu it sliped few times from the surface maybe the thermal paste was removed or somthing...ill try reinstalling it

 

[Lord Ammar]

i don't think there is anything wrong with your cooler installation
this is an expected result with nowadays weather

i hardly think so. my load temps are 53-55 on a hyper 212+ which is much smaller than this gigantic cooler

 

[Pleasant]

40c to 70 is quite high i think the cooler is not sittied properly
and use the method of thermal paste application what they company suggested

 

[AFQ]

Its only because you have done something wrong, weather isn't that bad.
If we say its because of weather then people with stock cooler must be touching 100C.