[SOLVED] .::The Official Mega PTCL Thread::. -- A Sequel Without Drama!! || [All is well!]

[maazsk97]

Does [MENTION=32544]usmanghazanfar[/MENTION] work in PTCL? I was getting high ping to Siege servers but he got the issue fixed pretty fast. I have never seen PTCL fix these issues instantly. Props to him.

 

[murtaza12]

Does [MENTION=32544]usmanghazanfar[/MENTION] work in PTCL? I was getting high ping to Siege servers but he got the issue fixed pretty fast. I have never seen PTCL fix these issues instantly. Props to him.

He knows some staff that work in PTCL networking department.

 

[REVENGED]

ptcl chocking speed barely getting 10mb on 25con i am on gpon
wtf is this what should i tell them to fix

 

[manobilla]

Finally after 21 days of yelling and complaint to PTA my package got upgraded.

nice can you share your modem stats?

 

[moosvi94]

nice can you share your modem stats?

Sure

 

[MS1104]

Can someone please run a trace on this 89.148.12.15

 

[yasirmehmood282]

Can someone please run a trace on this 89.148.12.15

Traceroute to 89.148.12.15 (89.148.12.15), 64 hops max.
1 www.routerlogin.com (192.168.1.1) time=26 ms
2 182.176.0.108 (182.176.0.108) time=68 ms
3 10.0.3.173 (10.0.3.173) time=68 ms
4 182.176.139.193 (182.176.139.193) time=68 ms
5 182.176.139.178 (182.176.139.178) time=70 ms
6 rwp44.pie.net.pk (221.120.248.11) time=48 ms
7 rwp44.pie.net.pk (221.120.248.1) time=48 ms
8 *
9 195.229.28.104 (195.229.28.104) time=28 ms
11 195.229.29.226 (195.229.29.226) time=74 ms
12 *
13 dynamic.ip.89.148.12.15.batelco.com.bh (89.148.12.15) time=104 ms
*** Traceroute at destination ***

 

[shaheerk]

Traceroute to 89.148.12.15 (89.148.12.15), 64 hops max.
1 www.routerlogin.com (192.168.1.1) time=26 ms
2 182.176.0.108 (182.176.0.108) time=68 ms
3 10.0.3.173 (10.0.3.173) time=68 ms
4 182.176.139.193 (182.176.139.193) time=68 ms
5 182.176.139.178 (182.176.139.178) time=70 ms
6 rwp44.pie.net.pk (221.120.248.11) time=48 ms
7 rwp44.pie.net.pk (221.120.248.1) time=48 ms
8 *
9 195.229.28.104 (195.229.28.104) time=28 ms
11 195.229.29.226 (195.229.29.226) time=74 ms
12 *
13 dynamic.ip.89.148.12.15.batelco.com.bh (89.148.12.15) time=104 ms
*** Traceroute at destination ***

Huh. When I tried it last night on my PTCL connection, I got this (ignore the fluctuations - see the lowest reading. I took this from an app on the phone, which has latencies varying on wifi but stable on 4G)

Trace to 89.148.12.15

1 - 192.168.100.1 (––)
499 4 (ms)
Avg: 251 ms Loss: 0/2 (0 %)
2 - 182.176.0.120 (PK)
7 17 (ms)
Avg: 12 ms Loss: 0/2 (0 %)
3 - 10.10.100.2 (––)
6 10 (ms)
Avg: 8 ms Loss: 0/2 (0 %)
4 - 10.0.2.149 (––)
25 374 (ms)
Avg: 199 ms Loss: 0/2 (0 %)
5 - 10.1.1.6 (––)
29 46 (ms)
Avg: 37 ms Loss: 0/2 (0 %)
6 - 202.125.128.157 (PK)
29 30 (ms)
Avg: 29 ms Loss: 0/2 (0 %)
7 - 221.120.248.1 (PK)
45 51 (ms)
Avg: 48 ms Loss: 0/2 (0 %)
8 - 195.229.28.104 (AE)
Loss: 2/2 (100 %)
9 - 195.229.31.80 (AE)
Loss: 2/2 (100 %)
10 - 195.229.29.226 (AE)
64 512 (ms)
Avg: 288 ms Loss: 0/2 (0 %)
11 -
12 -
13 - 89.148.12.15 (BH)
62 105 (ms)
Avg: 83 ms Loss: 0/2 (0 %)

62ms. Approx. Not bad. And I'm in Islamabad.

As for Mobilink 4G, which uses TW (for comparison sake), this is what I get:

Trace to 89.148.12.15

1 -
2 - 10.227.18.101 (––)
49 42 (ms)
Avg: 45 ms Loss: 0/2 (0 %)
3 - 10.232.40.165 (––)
30 66 (ms)
Avg: 48 ms Loss: 0/2 (0 %)
4 - 10.232.40.161 (––)
35 47 (ms)
Avg: 41 ms Loss: 0/2 (0 %)
5 - 10.232.40.13 (––)
Loss: 2/2 (100 %)
6 - 10.232.40.6 (––)
83 115 (ms)
Avg: 99 ms Loss: 0/2 (0 %)
7 - 119.30.105.237 (PK)
28 38 (ms)
Avg: 33 ms Loss: 0/2 (0 %)
8 - 119.30.105.201 (PK)
25 55 (ms)
Avg: 40 ms Loss: 0/2 (0 %)
9 - 119.30.106.41 (PK)
56 52 (ms)
Avg: 54 ms Loss: 0/2 (0 %)
10 - 117.20.31.5 (PK)
56 53 (ms)
Avg: 54 ms Loss: 0/2 (0 %)
11 - 110.93.252.190 (PK)
61 84 (ms)
Avg: 72 ms Loss: 0/2 (0 %)
12 - 213.144.176.232 (IT)
212 184 (ms)
Avg: 198 ms Loss: 0/2 (0 %)
13 - 213.144.176.177 (IT)
166 171 (ms)
Avg: 168 ms Loss: 0/2 (0 %)
14 - 89.211.6.225 (QA)
159 163 (ms)
Avg: 161 ms Loss: 0/2 (0 %)
15 - 89.211.3.74 (QA)
164 159 (ms)
Avg: 161 ms Loss: 0/2 (0 %)
16 - 82.148.106.102 (QA)
Loss: 2/2 (100 %)
17 -
18 -
19 - 89.148.12.15 (BH)
257 253 (ms)
Avg: 255 ms Loss: 0/2 (0 %)


Sent from my Pixel 2 using Tapatalk

 

[manobilla]

ptcl chocking speed barely getting 10mb on 25con i am on gpon
wtf is this what should i tell them to fix

ask them you are not getting full speed

 

[AzizUrRehman]

So after 20 days they install power system for all msags
I saw a vendor working on power system he said now our work finished two more teams will come to Install batteries and for iptv and bb testing after that you can get connection [emoji1787]

According to him this process will take 20 days more [emoji850]

Sent from my SM-G935F using Tapatalk

 

[manobilla]

So after 20 days they install power system for all msags
I saw a vendor working on power system he said now our work finished two more teams will come to Install batteries and for iptv and bb testing after that you can get connection [emoji1787]

According to him this process will take 20 days more [emoji850]

Sent from my SM-G935F using Tapatalk

here they installed one msag at a time i think. They installed msag at night, made wire connections and next day installed all the equipment batteries, made electric connections and msag was up and running in 2 days but it took 10 15 days for lineman to install all jumper wires and make connections with DP numbers and pair numbers for each DP for every old connection and now numbers are changed. In my area there were a lot of people at msag location asking lineman to install jumper wires for their number first. Lucky ones got there number up and running the same day but my number was not in the first list and it took 10 days for my number.

 

[AzizUrRehman]

here they installed one msag at a time i think. They installed msag at night, made wire connections and next day installed all the equipment batteries, made electric connections and msag was up and running in 2 days but it took 10 15 days for lineman to install all jumper wires and make connections with DP numbers and pair numbers for each DP for every old connection and now numbers are changed. In my area there were a lot of people at msag location asking lineman to install jumper wires for their number first. Lucky ones got there number up and running the same day but my number was not in the first list and it took 10 days for my number.

Yeah basically here they are converting all areas into msag system and for some areas they install gpon services thats why work is slow they process the same activity to all the msags like they install msag then power system than batteries for msags thats why process is very slow .

Once the iptv team clear the msag so they will install copper wire from old cabinet to new msag then i will take 10 to 12 days [emoji44][emoji44] and i think total msags are 90 to 100 in my exchnage .

Sent from my SM-G935F using Tapatalk

 

[manobilla]

Yeah basically here they are converting all areas into msag system and for some areas they install gpon services thats why work is slow they process the same activity to all the msags like they install msag then power system than batteries for msags thats why process is very slow .

Once the iptv team clear the msag so they will install copper wire from old cabinet to new msag then i will take 10 to 12 days [emoji44][emoji44] and i think total msags are 90 to 100 in my exchnage .

Sent from my SM-G935F using Tapatalk

old numbers are still working? old cabinets are still up and running? it gonna take a day or two to install wires from old cabinet to new cabinet and then lineman has to install jumper wires for every connection and that's gonna take a week or more, depends on how many numbers are assigned to every msag

- - - Updated - - -

Yeah basically here they are converting all areas into msag system and for some areas they install gpon services thats why work is slow they process the same activity to all the msags like they install msag then power system than batteries for msags thats why process is very slow .

Once the iptv team clear the msag so they will install copper wire from old cabinet to new msag then i will take 10 to 12 days [emoji44][emoji44] and i think total msags are 90 to 100 in my exchnage .

Sent from my SM-G935F using Tapatalk

you were not able to take pictures inside of msag?

 

[manobilla]

Sure

thanks can you share error part of stats? on my phone there is still static noise maybe because of wet underground splice or part of wire is exposed. but internet is stable so far very few errors. What about your line condition? Any kind of noise in your phone line? static or crackling noise? Here is my stat page i am on 15mb package

Uptime: 3D 5H 25M 16S

OH Frames:	49351880	20933560	0	0
OH Frame Errors:	0	2	0	0
RS Words:	1771186120	925919134	0	0
RS Correctable Errors:	22	13	0	0
RS Uncorrectable Errors:	0	0	0	0
HEC Errors:	0	0	0	0
OCD Errors:	0	0	0	0
LCD Errors:	0	0	0	0
Total Cells:	707959701	0	0	0
Data Cells:	245317951	0	0	0
Bit Errors:	0	0	0	0
Total ES:	0	2
Total SES:	0	0
Total UAS:	30	30

 

[AzizUrRehman]

old numbers are still working? old cabinets are still up and running? it gonna take a day or two to install wires from old cabinet to new cabinet and then lineman has to install jumper wires for every connection and that's gonna take a week or more, depends on how many numbers are assigned to every msag

- - - Updated - - -



you were not able to take pictures inside of msag?

Yeah old numbers and cabinet running up i have landline connection and phone is working .

My nearst msag is lock i will take pictures if lineman or cpe will be there .

Sent from my SM-G935F using Tapatalk

 

[PRINCE SALMAN]

Guys can any one help me to reduce my ping i am PTCL user and i have VDSL i am getting 350 ms in PUBG. Please, your kind help will be really appriciated. Thanks

Sent from my Redmi Note 5 using Tapatalk

 

[Aciel]

Can someone help me fill the complaint form of PTA about my exchange not installing VDSL Card then providing the service. We have the MSAG less than 300m away from house. MSAG was installed approx 4yrs ago.

I'm asking them to upgrade me to VDSL since last 2yrs. I'm very pissed now.

Sent from my OnePlus 5 using Tapatalk

 

[manobilla]

Can someone help me fill the complaint form of PTA about my exchange not installing VDSL Card then providing the service. We have the MSAG less than 300m away from house. MSAG was installed approx 4yrs ago.

Sent from my OnePlus 5 using Tapatalk

what your local exchange tells you?

 

[Aciel]

what your local exchange tells you?

1. They said the VDSL Card is not installed.
2. They are waiting for upper Dept. to order it.
3. The card is expensive.
4. Lines are weak in my area.

All this were said like 1yr ago. After that, no one picks up at the exchange.

Sent from my OnePlus 5 using Tapatalk

 

[manobilla]

1. They said the VDSL Card is not installed.
2. They are waiting for upper Dept. to order it.
3. The card is expensive.
4. Lines are weak in my area.

All this were said like 1yr ago. After that, no one picks up at the exchange.

Sent from my OnePlus 5 using Tapatalk

you better visit your exchange in person. In my area they installed new msag with vdsl cards but all my requests were denied with status "not feasible". I visited exchange everyday for 2 weeks then they upgraded my port to vdsl.