Yes it's operated by PTCL and they control it, others ISP's can purchase bandwidth from them.
Fiber 2 Home Internet Service by Fiberlink | Discussion (Read FIRST POST)
- Thread starter frazgta
- Start date
Considering TW laid down SMW-5 recently, it's highly improbable they'd be in need of purchasing more bandwidth, wouldn't you say?
It depends on the competition and market needs, if PTCL announce some dramatic changes after AAE-1, Transworld will have to do something in order to cope up.
hey guys I have a question to ask, how can I open/browse Fiberlin's GPON device settings being connected to the router?
I could connect PTCL's DSL modem while being connected to the router. PTCL's modem ip was 192.168.1.1 and router's ip was 192.168.0.1. I could open both i.e PTCL modem and Router's settings, but i cant open GPON's settings, though I could open via connecting my PC's lan cable to the GPON device.
[MENTION=138104]asaddon[/MENTION]
I could connect PTCL's DSL modem while being connected to the router. PTCL's modem ip was 192.168.1.1 and router's ip was 192.168.0.1. I could open both i.e PTCL modem and Router's settings, but i cant open GPON's settings, though I could open via connecting my PC's lan cable to the GPON device.
[MENTION=138104]asaddon[/MENTION]
Connect the device directly via the LAN cable to your machine and open the panel at 192.168.1.1 with the given username and password.
Once that's done, go to the LAN settings of the device and enable DHCP and NAT on the LAN network. This should technically enable your router to receive the local LAN IP from your GPON device once it's connected to it.
You can then try to open it directly through your router.
Sent from my iPhone using Tapatalk
I had already enabled DHCP , but didn't know about NAT, it was not on the same page, but on other, it was already checked in IpV4 option.
and Assign IspDNS was already unchecked, still not opening via router
here's the 2 pages of my device
try to change your GPON ONT LAN IP to 192.168.0.2 and then make sure on your Wifi router the DHCP range starts from 192.168.0.3 or upwards.I had already enabled DHCP , but didn't know about NAT, it was not on the same page, but on other, it was already checked in IpV4 option.
and Assign IspDNS was already unchecked, still not opening via router
here's the 2 pages of my device
then hopefully you can access your GPON device when connected with ur wifi device
Sent from my SM-G935F using Tapatalk
Same range ip address won't work because the ont device is on NAT.
Your settings seems correct so just try again after restarting both router and ont and if it still doesn't work then it's your routers limitation, not all routers support dual access WAN at least on the default firmware.
Your settings seems correct so just try again after restarting both router and ont and if it still doesn't work then it's your routers limitation, not all routers support dual access WAN at least on the default firmware.
Yeah it's fine now. Was getting 100ms more and a little packet loss for the last 2 hours
Sent from my LG-H900 using Tapatalk
We have disabled traderscore and are working on a fix. There was a bug with the plugin | Click for Discord
- No one is chatting at the moment.
-
Chandoo:
170 + countries where Steam sells but PSN doesn't will lose access unless they use VPNfaraany3k said: -
Chandoo:
It has a worst rating on Steam than last years MW3 now. Jeese Sony, how can you fuck it up THIS BAD
-
faraany3k:
I have heard that it is now unplayable in countries which do not support handful of third world countries not recognized by Sony like Pakistan. Steam is a true global platform.Then they cry that console gaming is dying. -
Necrokiller:
Gaben ki reach hai, PSN ki nahi hai. Gaben ain't stressing over publishers who rush to his store in the first place
-
Chandoo:
saeen I don't think the PSN teams are stressing over needing to offer hundreds of thousands of refunds lol
-
Necrokiller:
You reap what you sow. This is what happens when you take away choice from consumers. Even with 88% split going to developers, they can't recoup costs. Meanwhile, Helldivers 2 is a massive hit for Sony thanks in big part to Steam.iampasha said: -
iampasha:
Alan wake 2 is yet to recover it's development costs. Due to no physical release and no steam launch. -
faraany3k:
Tears of Kingdom saal pehle shuru ki thee, ab tk pehle area se nai nikla. Life sucks donkey balls.
