[SOLVED] .::The Official Mega PTCL Thread::. -- A Sequel Without Drama!! || [All is well!]

[Nva1]

coz i heard that Vdsl is only available for Copper line, So i thought i should confirm it first and avoid getting scammed by ptcl lol.
i've alrdy applied for the vdsl but imnt sure my line can take 8mb, i used to get random dc's when i was on 8mb with +20 Snr margin. Lets see how it goes

anyway for the help !

 

[murtaza12]

Anyone else facing issues with YouTube?
Mobile version doesn't work, neither does the application on both Android and iOS.
It opens on PC, but videos load very slowly.

Sent from my XT1100

 

[Mephisto]

Youtube seems to be working fine on my 8MB DSL. However iPtorrents is not working... are they blocking it?


This is the error I'm getting on chrome

[h=1]This site can’t provide a secure connection[/h]www.iptorrents.com sent an invalid response.
ERR_SSL_PROTOCOL_ERROR

 

[Aizazst]

Youtube seems to be working fine on my 8MB DSL. However iPtorrents is not working... are they blocking it?


This is the error I'm getting on chrome

Yup same here. Try a different domain, works for me.


Sent from my iPhone using Tapatalk

 

[xeesh]

Anyone else facing issues with YouTube?
Mobile version doesn't work, neither does the application on both Android and iOS.
It opens on PC, but videos load very slowly.

Sent from my XT1100

Same here. Youtube app on IOS hasn't been working since last night but on android youtube app is working and web version is fine as well [emoji52]

 

[woof]

Anyone has any idea when the routing issue is going to be resolved? Its almost a month now. Its so frustrating.

 

[Joker99]

PTCL at it again... Youtube is not working on PC or Android App for me, modem restarted several times and using Google DNS all across.

 

[murtaza12]

PTCL at it again... Youtube is not working on PC or Android App for me, modem restarted several times and using Google DNS all across.

I used OpenDNS, Level3 and Google DNS. Nothing works. YouTube just won't load.
Already complained to PTCL, waiting for a stupid excuse now.

Sent from my HTC One_M8

 

[AhmedShahwaz]

YouTube blocked again.

 

[xeesh]

For me youtube isn't working on IOS app but on Android app and pc both are working without a problem.


Sent from my iPhone using Tapatalk

 

[CuriousDevil]

Can anybody find any way to install factory firmware on ptcl dlink 2750u this ptcl firmware is shit and when i try to update with any factory firmware it says illegal age something


Sent from my iPhone using Tapatalk

 

[murtaza12]

Can anybody find any way to install factory firmware on ptcl dlink 2750u this ptcl firmware is shit and when i try to update with any factory firmware it says illegal age something


Sent from my iPhone using Tapatalk

I'm trying to figure it out as well. I think it's possible with a telnet command, however I haven't gotten around to doing it yet. Can't risk a bricked modem right now, don't have any extras.

Also, I haven't exactly figured out what revision our 2750U is. Is it the C1 or the U1? Google search shows the same router pic for both revisions, back of the PTCL router just says HW Ver: 1.00

 

[CuriousDevil]

I'm trying to figure it out as well. I think it's possible with a telnet command, however I haven't gotten around to doing it yet. Can't risk a bricked modem right now, don't have any extras.

Also, I haven't exactly figured out what revision our 2750U is. Is it the C1 or the U1? Google search shows the same router pic for both revisions, back of the PTCL router just says HW Ver: 1.00

On the backside of my router it is J1

 

[murtaza12]

On the backside of my router it is J1

Oddly enough, mine says T3.

Sent from my XT1100

 

[murtaza12]

[MENTION=127605]CuriousDevil[/MENTION]
I searched everywhere for a Revision J1 of the 2750U, couldn't find it.
Type these telnet commands:
cat /proc/cpuinfo
cat/proc/meminfo

To use telnet, open CMD, type the following:
telnet 192.168.10.1
It will ask for username and password.
Then it will ask for commands, enter the two I mentioned above and put them here in spoiler tags so they don't clog up the page.
If they match the HW: T3 that I have, the same firmware can be used. Keep in mind, the only D-Link website that had firmware for the T3 revision was D-Link South Africa.

Anyway, I've downloaded the T3 firmware, will hopefully flash it later today.

 

[murtaza12]

Well... here's how I did it.
Tried a shit ton of different commands, they wouldn't work.
I thought, why even try the web interface if everyone says it doesn't accept and it fails.
Well, I said, let's give it a shot. I did and it worked on the first try. It accepted the firmware, flashed it and rebooted into the new D-Link firmware. It connected in less time than the PTCL one, very quick overall. Less lag, doesn't randomly time out and everything works.
Less bullshit, here are the screenshots:

Spoiler: show

 

[CuriousDevil]

Well... here's how I did it.
Tried a shit ton of different commands, they wouldn't work.
I thought, why even try the web interface if everyone says it doesn't accept and it fails.
Well, I said, let's give it a shot. I did and it worked on the first try. It accepted the firmware, flashed it and rebooted into the new D-Link firmware. It connected in less time than the PTCL one, very quick overall. Less lag, doesn't randomly time out and everything works.
Less bullshit, here are the screenshots:

Spoiler: show

Awesome bro You are the legend [emoji3] I am gonna telnet after having my breakfast and post here most probably it will work

 

[CuriousDevil]

Here you go bro [MENTION=42544]murtaza12[/MENTION]

Spoiler: show

BCM96318 Broadband Router
Login: admin
Password:



> cat /proc/cpuinfo
system type : 96318REF
processor : 0
cpu model : Broadcom BCM3302
BogoMIPS : 331.77
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : no
ASEs implemented :
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available


unaligned exceptions : 65624
>








cat /proc/meminfo


> cat /proc/meminfo
MemTotal: 60028 kB
MemFree: 15304 kB
Buffers: 5080 kB
Cached: 18692 kB
SwapCached: 0 kB
Active: 10244 kB
Inactive: 18956 kB
Active(anon): 5428 kB
Inactive(anon): 0 kB
Active(file): 4816 kB
Inactive(file): 18956 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 5456 kB
Mapped: 5600 kB
Slab: 9916 kB
SReclaimable: 668 kB
SUnreclaim: 9248 kB
PageTables: 452 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 30012 kB
Committed_AS: 11304 kB
VmallocTotal: 1032148 kB
VmallocUsed: 5060 kB
VmallocChunk: 994008 kB
>

 

[moosvi94]

Here you go bro [MENTION=42544]murtaza12[/MENTION]

Spoiler: show

BCM96318 Broadband Router
Login: admin
Password:



> cat /proc/cpuinfo
system type : 96318REF
processor : 0
cpu model : Broadcom BCM3302
BogoMIPS : 331.77
wait instruction : yes
microsecond timers : yes
tlb_entries : 32
extra interrupt vector : no
hardware watchpoint : no
ASEs implemented :
shadow register sets : 1
core : 0
VCED exceptions : not available
VCEI exceptions : not available


unaligned exceptions : 65624
>








cat /proc/meminfo


> cat /proc/meminfo
MemTotal: 60028 kB
MemFree: 15304 kB
Buffers: 5080 kB
Cached: 18692 kB
SwapCached: 0 kB
Active: 10244 kB
Inactive: 18956 kB
Active(anon): 5428 kB
Inactive(anon): 0 kB
Active(file): 4816 kB
Inactive(file): 18956 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 5456 kB
Mapped: 5600 kB
Slab: 9916 kB
SReclaimable: 668 kB
SUnreclaim: 9248 kB
PageTables: 452 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 30012 kB
Committed_AS: 11304 kB
VmallocTotal: 1032148 kB
VmallocUsed: 5060 kB
VmallocChunk: 994008 kB
>

Have u flashed it? Can u tell me the procedure too


Sent from my C5303 using Tapatalk

 

[CuriousDevil]

NO I haven't flashed mine atm as my router Hardware Version is J1 whereas his router is T3 so we are matching my J1 specs with T3 if it is same then we can flash on J1 too.

BTW [MENTION=131258]moosvi94[/MENTION] bro can you tell your router HW version?