[SOLVED] .::The Official Mega PTCL Thread::. -- A Sequel Without Drama!! || [All is well!]

[sTraNg3r]

Hmm finally some good news. But valve servers are still giving 80ms ping , its only BF1 which is giving more ping.

By the way thanks for updating us. I really appreciate it. Any ETA on the fix yet?

Sent from my Honor 6X using Tapatalk

Valve servers are in UAE. While i3d are in Oman. No ETA yet.

 

[iNCEPTiON]

Valve servers are in UAE. While i3d are in Oman. No ETA yet.

Oh sad life. 2 din ki khushi thee I dont think so it will be done anytime soon

Sent from my Honor 6X using Tapatalk

 

[sTraNg3r]

Damn. God keeps testing our patience. It's IMEWE again. (lmao)

 

[iNCEPTiON]

Damn. God keeps testing our patience. It's IMEWE again. (lmao)

Lol again 3 months gayay

Sent from my Redmi 4A using Tapatalk

 

[MS1104]

Valve servers are in UAE. While i3d are in Oman. No ETA yet.

I3d.net are in Dubai. We are currently connecting through omantel on TW because they have a direct connection with i3d and also an upstream for TW. Before the cable cut we were connecting through DU.

 

[Dark Sith]

Mode:	ADSL2+
Type:	Interleave
Line Coding:	Trellis On
Status:	No Defect
Link Power State:	L0
	Downstream	Upstream
SNR Margin (dB):	16.9	11.1
Attenuation (dB):	22.0	11.3
Output Power (dBm):	19.5	12.4
Attainable Rate (Kbps):	20352	1072
Rate (Kbps):	11263	863
MSGc (number of bytes in overhead channel message):	89	14
B (number of bytes in Mux Data Frame):	238	12
M (number of Mux Data Frames in FEC Data Frame):	1	16
T (Mux Data Frames over sync bytes):	1	7
R (number of check bytes in FEC Data Frame):	16	16
S (ratio of FEC over PMD Data Frame length):	0.6762	7.6255
L (number of bits in PMD Data Frame):	3017	235
D (interleaver depth):	64	8
Delay (msec):	10	15

[MENTION=11094]StrikerX[/MENTION]


are the above values good for a copper line - they are upgrading the exchange thats what i heard bringing in GPON to dha phase 1 , dont know if its true or not - plus they repaired the damanged lines after like 4 years -

 

[StrikerX]

Mode:	ADSL2+
Type:	Interleave
Line Coding:	Trellis On
Status:	No Defect
Link Power State:	L0
	Downstream	Upstream
SNR Margin (dB):	16.9	11.1
Attenuation (dB):	22.0	11.3
Output Power (dBm):	19.5	12.4
Attainable Rate (Kbps):	20352	1072
Rate (Kbps):	11263	863
MSGc (number of bytes in overhead channel message):	89	14
B (number of bytes in Mux Data Frame):	238	12
M (number of Mux Data Frames in FEC Data Frame):	1	16
T (Mux Data Frames over sync bytes):	1	7
R (number of check bytes in FEC Data Frame):	16	16
S (ratio of FEC over PMD Data Frame length):	0.6762	7.6255
L (number of bits in PMD Data Frame):	3017	235
D (interleaver depth):	64	8
Delay (msec):	10	15

[MENTION=11094]StrikerX[/MENTION]


are the above values good for a copper line - they are upgrading the exchange thats what i heard bringing in GPON to dha phase 1 , dont know if its true or not - plus they repaired the damanged lines after like 4 years -

They're good. Besides, if they're bringing GPON to DHA1 then you don't need to worry about these 'stats' anymore when you get GPON.

 

[MS1104]

Mode:	ADSL2+
Type:	Interleave
Line Coding:	Trellis On
Status:	No Defect
Link Power State:	L0
	Downstream	Upstream
SNR Margin (dB):	16.9	11.1
Attenuation (dB):	22.0	11.3
Output Power (dBm):	19.5	12.4
Attainable Rate (Kbps):	20352	1072
Rate (Kbps):	11263	863
MSGc (number of bytes in overhead channel message):	89	14
B (number of bytes in Mux Data Frame):	238	12
M (number of Mux Data Frames in FEC Data Frame):	1	16
T (Mux Data Frames over sync bytes):	1	7
R (number of check bytes in FEC Data Frame):	16	16
S (ratio of FEC over PMD Data Frame length):	0.6762	7.6255
L (number of bits in PMD Data Frame):	3017	235
D (interleaver depth):	64	8
Delay (msec):	10	15

[MENTION=11094]StrikerX[/MENTION]


are the above values good for a copper line - they are upgrading the exchange thats what i heard bringing in GPON to dha phase 1 , dont know if its true or not - plus they repaired the damanged lines after like 4 years -

DHA phase 1 Karachi?

 

[StrikerX]

DHA phase 1 Karachi?

Islamabad.

 

[REVENGED]

my bf4 ping down from 160 to140 ptcl same server

 

[iNCEPTiON]

Getting 160ms on Hong Kong servers on PTCL . I hope ME routing will be fixed soon.

 

[sTraNg3r]

I3d.net are in Dubai. We are currently connecting through omantel on TW because they have a direct connection with i3d and also an upstream for TW. Before the cable cut we were connecting through DU.

Ok I stand corrected then. Since we were connecting to i3d servers via Omantel I assumed their servers were present at the co-location hub used in Oman.

Anyway Omantel remains effected currently, but other commercial plans with them are currently being drawn. I expect them to be fast-tracked now due to IMEWE.

 

[iNCEPTiON]

Ok I stand corrected then. Since we were connecting to i3d servers via Omantel I assumed their servers were present at the co-location hub used in Oman.

Anyway Omantel remains effected currently, but other commercial plans with them are currently being drawn. I expect them to be fast-tracked now due to IMEWE.

Hong Kong ping is better now (160ms)
But less than 100 is preferred of course. I hope IMEWE is fixed soon and my 80ms is back to ME servers.

Sent from my Honor 6X using Tapatalk

 

[itstaha17]

Why did my SNR go down so quick? Had a new line installed and it was 200 a few days ago???

Sent from my SM-N920C using Tapatalk

 

[itstaha17]

Why did my SNR go down so quick? Had a new line installed and it was 200 a few days ago???

Sent from my SM-N920C using Tapatalk

And getting 1mb speed wtf

Sent from my SM-N920C using Tapatalk

 

[iNCEPTiON]

Why did my SNR go down so quick? Had a new line installed and it was 200 a few days ago???

Sent from my SM-N920C using Tapatalk

Restart it , that might be due to rain as u know this is Pakistan. Secondly thats ADSL which is not so stable. I have VDSL and it gives me stable connectivity .
My line supports 45Mbps connection just waiting for transformed packages so I can upgrade to 20Mbps

Sent from my Honor 6X using Tapatalk

 

[itstaha17]

Restart it , that might be due to rain as u know this is Pakistan. Secondly thats ADSL which is not so stable. I have VDSL and it gives me stable connectivity .
My line supports 45Mbps connection just waiting for transformed packages so I can upgrade to 20Mbps

Sent from my Honor 6X using Tapatalk

Restart kiya. PTCL dimagh khapow hai waise.

Sent from my SM-N920C using Tapatalk

 

[iNCEPTiON]

Restart kiya. PTCL dimagh khapow hai waise.

Sent from my SM-N920C using Tapatalk

yep. I dont know when PTCL will be stable.

 

[MS1104]

Ok I stand corrected then. Since we were connecting to i3d servers via Omantel I assumed their servers were present at the co-location hub used in Oman.

Anyway Omantel remains effected currently, but other commercial plans with them are currently being drawn. I expect them to be fast-tracked now due to IMEWE.

Yup. I3d.net guys told me that ptcl connecting through Omantel was unintentional but they were hoping that could be a possible solution in the future for ptcl. If commercial plans are being drawn up with Omantel then that is good news for all of you

 

[itstaha17]

yep. I dont know when PTCL will be stable.

Restarting didnt help. Even went up and removed wire from any water puddles. Still SNR down. Literally replaced the phone line 2 days ago. Speed and pings are shit and lineman will come after Eid.

Any other temporary solution anyone? Should I try resetting the modem or something? Please yaar madad karo

Sent from my SM-N920C using Tapatalk