[HELP] HD4830 Problems

[abdullah11]

hello i purchased a new 3d card (second hand) its a 4830. the thing is i dont understand whats the problem but as i plug it in my mobo gpu heats up too much that may burn on contact. and is showing two lines which clear when i press it (minor problem) .plz tell me whats the problem is it m mobo supply r gpu
ps there are two problems listed pls give seperate ans
here is a screen shot which ma help well i cant upload due to the new rules but the picture shows the followning
cpu temp 34
mobo temp 78
cpu fan speed 897 rpm
+5 vin 5.0002
+12 vin 11.71
+1.25 vin 1.26
vcore a .9630


---------- Post added at 12:20 AM ---------- Previous post was at 12:19 AM ----------

mobo is dgr1p3 classic
cpu is c2d e8400
graphic card iceq 4830
supply scyth 500watts

 

[mazkraven]

Can you give us a GPU-Z Screenshot for tab#2 i.e. the Sensors tab.
It will display your gpu temps and would help us understand your problem better!

 

[mave3]

it to hard to tell like this but the 12v rail is on the down side.
the gpu is not getting sufficient power.
and the cpu is getting to hot.
whats with the fan...at 897..rpm..
u must be kidding.
it should be near 1500 to 1700..
so check the cpu...as well it might not be ur card...

 

[hasanJ]

Cant say much without looking at HW Monitor and GPU-Z Screenshots (Second Tab as mazkraven has said)

Upload ur Screenshots to tinypic.com or imgur.com and post a link here

 

[Shining Wizard]

Take one of these steps to diagnose this issue:

1.Borrow a decent psu from someone to check your pc so if the graphic cards works on that psu then it will assure you that your psu is the culprit, if the same problem presist then your graphic card is faulty.

OR

2.Take out your graphic card and check it in any of your mate's pc which has a decent psu installed (the conclusion will be the same as the step 1)

 

[abdullah11]

HELLO PEOPLE thnx fr all ur replys the problem was gpu but i still dont understand y is my fan speed 800rpm and mobo temp 80 c :O plz help and what about psu should i change it????

 

[striker101]

HELLO PEOPLE thnx fr all ur replys the problem was gpu but i still dont understand y is my fan speed 800rpm and mobo temp 80 c :O plz help and what about psu should i change it????

Mobo temp is okay .. nothing will happen to your mobo.

And we cannot help you unless you provide us the necessary information which everyone is asking about!

 

[zainu]

Mobo temp is okay .. nothing will happen to your mobo.

And we cannot help you unless you provide us the necessary information which everyone is asking about!

80C temp of mobo and u are saying ok

brother try to change ur psu.. something wrong with it i think.. increase the speed of ur gpu by msi after burner utility....

 

[striker101]

80C temp of mobo and u are saying ok

brother try to change ur psu.. something wrong with it i think.. increase the speed of ur gpu by msi after burner utility....

here Zainu actually want to say "Increase your GPU's FAN Speed"

yeah.. 80'C is Okay for the Mobo.
Nothing will happen.

 

[abdullah11]

ImageShack® - Online Photo and Video Hosting here is the screen shot

 

[mave3]

PLz guys refrain from giving wrong advises to a person who knows..nothing..
how can u say [MENTION=1352]striker[/MENTION] that 80 C is normal temp for mobo..
plz bro u must be kidding okay.
the mobo temps should not exceed more then 50 C..
so its better u guys give some appropriate advise to the guy..
1st check with another PSU and then check the modo on the other psu as well and then get back..
secondly for the card...increase the fan speed and try to lower the clock speeds by using a good gpu tool..
and see if it makes any difference...!!!!

 

[mazkraven]

80*C mobo temps are NOT OK at all.!
the mobo wud die if it reaches its tjmax!
As for OP, try checking your system with another psu
In speedfan increase all the fan speeds and see if the temps lower!

 

[abdullah11]

PLz guys refrain from giving wrong advises to a person who knows..nothing..
how can u say @striker that 80 C is normal temp for mobo..
plz bro u must be kidding okay.
the mobo temps should not exceed more then 50 C..
so its better u guys give some appropriate advise to the guy..
1st check with another PSU and then check the modo on the other psu as well and then get back..
secondly for the card...increase the fan speed and try to lower the clock speeds by using a good gpu tool..
and see if it makes any difference...!!!!

yaar where can i get a psu
and secondly how to increase the cpu speed ????? its 800 rpm

---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------

80*C mobo temps are NOT OK at all.!
the mobo wud die if it reaches its tjmax!
As for OP, try checking your system with another psu
In speedfan increase all the fan speeds and see if the temps lower!

how do i handle it man my cpu tem also goes upto 45-50 c although i have opend the side casse

 

[mazkraven]

yaar where can i get a psu
and secondly how to increase the cpu speed ????? its 800 rpm

---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------



how do i handle it man my cpu tem also goes upto 45-50 c although i have opend the side casse

You can ask your friends and borrow their psu for a while.
are you using speedfan to monitor temps and fan speeds?

 

[abdullah11]

You can ask your friends and borrow their psu for a while.
are you using speedfan to monitor temps and fan speeds?

yes speed fan

 

[sohaib50k]

Increase the cpu fan speed from the bios,increase the gpu fan speed by using software such as msi afterburner etc.

 

[abdullah11]

Increase the cpu fan speed from the bios,increase the gpu fan speed by using software such as msi afterburner etc.

h0w to increase fan speed??

 

[sohaib50k]

Didnt i just tell u that?^