Cooler Master Hyper 212 Plus Unboxing

[Pleasant]

these are good with 1.44vcore By PUSH PULL u mean both fans BLOW THE AIR OUT TO THE CASE ?

 

[Baber Kamal]

the fan which is installed on the rams side has exposed wings and the other fan has covered side on the outside u better watch some youtube video to install push pull fans

 

[Pleasant]

the fan which is installed on the rams side has exposed wings and the other fan has covered side on the outside u better watch some youtube video to install push pull fans

Yeah i did the same are u using These Fans on Power Supply or Mobo ? do hear it noise

at my side they are quiet

 

[AFQ]

Here are my results:
Configuration: E5200 at 3.7Ghz : FSB: 370MHz : Vcore 1.44v
Push Pull Hyper 212 plus

Now those are some awesome results there baber!
What were ur temps with N520?

 

[Pleasant]

i think the ambient temp is high at my side sweating sort of condition here
i reapplied the thermal paste got not much difference just 1 or 2c difference
I touched the GPU Ram and HDD DRIVE bay all were HOT :S

I have one intake fan and 1 exahust this might be the case here for the heating up issue

 

[Baber Kamal]

yar i cheked the hyper n520 temps a while ago in different conditions and they were around 65-68c for both cores but now u can't compare those results with my current results coz these are in somewhat different conditions. But I'm dead sure that Hyper 212 plus is an awsome cooler and is in the same league as Thermal right ultra, and sunbeam core contact freezer and is better than v8.

@pleasant: mate don't be worried so much and don't apply thermal paste again n again coz i doubt it will make any difference. Just overclock your quad a bit and then stress test for cheking the temps if after overclock your temps are in between gud range then your cooler is working well.

 

[Pleasant]

ok will check that tommorrow but casing ventelation is the issue here

one thing my 4th core sensor not working why ? i mean its not updating

 

[Baber Kamal]

it's a case pf stuck sensor which is very common with these processors so no need to worry there too coz the 4th core will also have almost same temps as other 3.

One more thing i'm having one intake fan on the front, 1 exhaust fan on the top end and 1 exhaust fan on the back all 120mm fans. and 2 fans in push pull on cpu cooler one which came with it and other one is very gud fan with very high cfm (airflow) which is around 80-100CFM

 

[Voodoo]

@pleasent, congratulation brother, please post your temp. after overclocking your Q9450 round 3.6~3.7GHz

@ Baber bhai, did you raise vcore upto 1.44 for testing?
as i believe your E5200 reaches 4 GHz @ below than this vcore (1.44)

 

[OmMeE]

Here are my results:
Configuration: E5200 at 3.7Ghz : FSB: 370MHz : Vcore 1.44v
Push Pull Hyper 212 plus

Temps are fine seeing that ur vCOre is 1.44v.. damn thats alot...

 

[Pleasant]

oced the processor to 3.6
but occt giving error

ERROR DETECTED ON CORE#1

Maximum temp on Stress test was 62c checked on Prime95

 

[Voodoo]

try to download the latest version of OCCT
Uninstall the current version first
btw Prime 95 Small FFT is enough
please post your results will Dual fans also

 

[MtJx]

congrats pleasent

 

[Baber Kamal]

@Voodoo: Bro the processor which reaches 4Ghz with 1.38v is installed in my brother's system and this one is another E5200 which reaches max 3.7Ghz with FSB 370Mhz and this is it's max and stable overclock.

 

[opethian]

well im amazed to see hyper 212 at just 2400 rupees at galaxy website which is damn impressive stuff
really a cooler with performance equal to or quite near tru extreme n price tag of most affordable cooler out there is the best cooler avail in local market!
n esp its design ... cm team did a great job by hijacking an idea from xigmatek or sunbeam!!!
n it is 212 plus ... wow simply wow ... keeping in view its real performance i think ur results r not that great ... or u have applied too much of thermal paste ...
also keep in mind ... let thermal paste get settled n get even dnt apply too much of paste it basically acts as an insulator instead of providing a smooth contact surface ...
but CM has done a great job ... by economizing on every thing resulting in an excellent cpu cooler with cheapest pricetag!
well kindly share ur overclocking results ... n i see there is no mention of any 1366 lga kit or 1156 ... can other cooler master kits be used with it???

 

[Baber Kamal]

@opethian: bro it's got only one universal kit which can be used for installing any processor including 775, i5, i7, amd etc. it's just that we've to adjust the clips a little bit for different applications and i don't think that other kits can be used with this cooler except the one which is provided along with it.

 

[digitalism]

Congratulations. Nice buy

 

[opethian]

well i think v8 kit can be used ... cause now cm has started a gud thing one retention kit for all coolers esp for i7
but khair still pleasent u have not shown us any overclocking results!

 

[AFQ]

^V8 kit is different, it cant be used.

 

[Pleasant]

Here are the OC Results OCED it To 3.2 GHZ did a 6min Run