Today I tried BSEL mod and that too with a copper wire that was held well in place by tape and glue even after I removed my processor after failure :S :emergency:
the problem was I could not boot motherboard (intel dg31pr ) stuck at its main screen whenever i tried to boot then I removed the wire and it booted up fine
I have experienced this problem earlier at stock sppeds too but if I reset it starts in 2nd try whats wrong PC or mobo and as nothing burnt or fried so I hope I did not do that MOD wrong what are your thoughts whats the catch how can I verify IF PSU or MOBO is at fault or I did not do that mod correctly ?
can BSEL work with Wire ?
sorry forgot to mention my PSU is 350 watt with 16a on 12v rail and I had one 250gb HDD one optical drive intel e 5200 2 gb 667 ram and ATI 4670 plus one 80 mm exaust fan at that time
the problem was I could not boot motherboard (intel dg31pr ) stuck at its main screen whenever i tried to boot then I removed the wire and it booted up fine
I have experienced this problem earlier at stock sppeds too but if I reset it starts in 2nd try whats wrong PC or mobo and as nothing burnt or fried so I hope I did not do that MOD wrong what are your thoughts whats the catch how can I verify IF PSU or MOBO is at fault or I did not do that mod correctly ?
can BSEL work with Wire ?
sorry forgot to mention my PSU is 350 watt with 16a on 12v rail and I had one 250gb HDD one optical drive intel e 5200 2 gb 667 ram and ATI 4670 plus one 80 mm exaust fan at that time
Last edited: