Gpu rusted connectors not allowing display

[Urhum]

use kerosine oil to clear those pin let it dry and then test
if it still doesnt work open the Cooler and wash the PCB with it let it dry and re test

Thanks for the help.

 

[Urhum]

[MENTION=4999]Pleasant[/MENTION]
Thanks bro but my card started to work by itself.
I did this technique and let my computer be in the black screen for 20m and i just restarted my computer and it started to work.

Here are the steps I tried to fix the issue on my computer.


1. Turn off the computer and unplug
2. Remove Graphic card
3. Plug the monitor to your video output
4. Turn on the computer
5. Click on start and type msconfig
6. Select the Boot tab and click on the box that says Safe boot with minimal selected.
7. Apply then click ok.
8. DO NOT RESTART.
9. Shut Down computer and unplug
10. Install Graphic card
11. Turn on the computer (should boot into safe mode)
12. Go into Device Manager
13. Expand Display Adapter
14. Disable the Intel(R) HD Graphics 4000 driver. (DO NOT UNINSTALL)
15. Click the start button and type msconfig
16. Unclick Safe boot
17. Restart


The computer will restart normally and will no longer get the black screen. See if that works for you. I didn't mess with any setting in the bios. I am assuming that having two graphic driver install don't like to play well with each other

- - - Updated - - -
[MENTION=4999]Pleasant[/MENTION]
Thanks bro but my card started to work by itself.
I did this technique and let my computer be in the black screen for 20m and i just restarted my computer and it started to work.

Here are the steps I tried to fix the issue on my computer.


1. Turn off the computer and unplug
2. Remove Graphic card
3. Plug the monitor to your video output
4. Turn on the computer
5. Click on start and type msconfig
6. Select the Boot tab and click on the box that says Safe boot with minimal selected.
7. Apply then click ok.
8. DO NOT RESTART.
9. Shut Down computer and unplug
10. Install Graphic card
11. Turn on the computer (should boot into safe mode)
12. Go into Device Manager
13. Expand Display Adapter
14. Disable the Intel(R) HD Graphics 4000 driver. (DO NOT UNINSTALL)
15. Click the start button and type msconfig
16. Unclick Safe boot
17. Restart


The computer will restart normally and will no longer get the black screen. See if that works for you. I didn't mess with any setting in the bios. I am assuming that having two graphic driver install don't like to play well with each other

 

[Pleasant]

[MENTION=75162]Urhum[/MENTION] this looks like Driver / windows issue more than hardware itself mine worked after the method i told you as it was hardware

- - - Updated - - -
[MENTION=75162]Urhum[/MENTION] this looks like Driver / windows issue more than hardware itself mine worked after the method i told you as it was hardware

 

[Urhum]

[MENTION=4999]Pleasant[/MENTION]
It could be my driver or it could be something else. I think it was my monitors fault also, like when i wiggled the monitor port a little bit it started to work and when i used the above method it started to work also. IDK but i am happy and relieved now. Thanks for your help anyway bro

- - - Updated - - -
[MENTION=4999]Pleasant[/MENTION]
It could be my driver or it could be something else. I think it was my monitors fault also, like when i wiggled the monitor port a little bit it started to work and when i used the above method it started to work also. IDK but i am happy and relieved now. Thanks for your help anyway bro