Dual band Wifi M2 card

[muhammadsauud]

Hi - My laptop came with this card, and for some reason the wifi automatically disconnects and reconnects after a few minutes, also SSID disappears aswell, I have tried everything from drivers to troubleshooting all known possible solutions, since no other device has this issue I gather the only issue is with my card.

Would someone guide me where can I get a good quality card here?

 

[smaaz]

Try searching olx, why not remove clean and install again to check for errors.

Try external usb based wifi dongle and see the behavior if its the same might be software issue.

 

[Simonsayz]

wifi automatically disconnects and reconnects

SSID disappears

no other device has this issue

where can I get a good quality card here?

That is an Intel AX210NGW , which is an AX / WiFi 6E card, it is currently the latest WifFI card that is available globally. Pretty sure that the issue is not with this card but with your WiFi router. Check your signal strength between your laptop & WiFi router.

1. Connect your Laptop to your WiFi

2. Search for Powershell in the Windows search box and click the top result to open the app.

3. Now Copy & Paste the following command in PowerShell to view Wi-Fi signal strength & press Enter:

(netsh wlan show interfaces) -Match '^\s+Signal' -Replace '^\s+Signal\s+:\s+',''

4. See the signal quality output. (The percentage goes from 0 to 100, where 100 percent indicates excellent signal quality.)

Post a screen shot here and we'll go from there

 

[muhammadsauud]

That is an Intel AX210NGW , which is an AX / WiFi 6E card, it is currently the latest WifFI card that is available globally. Pretty sure that the issue is not with this card but with your WiFi router. Check your signal strength between your laptop & WiFi router.

1. Connect your Laptop to your WiFi

2. Search for Powershell in the Windows search box and click the top result to open the app.

3. Now Copy & Paste the following command in PowerShell to view Wi-Fi signal strength & press Enter:

(netsh wlan show interfaces) -Match '^\s+Signal' -Replace '^\s+Signal\s+:\s+',''

4. See the signal quality output. (The percentage goes from 0 to 100, where 100 percent indicates excellent signal quality.)

Post a screen shot here and we'll go from there

Sorry for the extremely late reply, I had been very busy with work and couldn't check the replies, here is the screenshot:



The signal strength is 81% so don't know where to go from here

 

[Simonsayz]

Sorry for the extremely late reply, I had been very busy with work and couldn't check the replies, here is the screenshot:

View attachment 91207

The signal strength is 81% so don't know where to go from here

Which router do you have?
If you have any legacy devices that use 2.4Ghz ONLY, remove them, then check.

 

[muhammadsauud]

Which router do you have?
If you have any legacy devices that use 2.4Ghz ONLY, remove them, then check.

I'm using the stock Huawei ONT router from stormfiber

 

[asadlarik]

been through this on two different laptops. play with your router wifi settings.

 

[muhammadsauud]

been through this on two different laptops. play with your router wifi settings.

There's not a single setting I haven't tried on the router but maybe this Huawei ONT is shit, planning to get a 5gig Mi router and connect it through bridge mode

 

[asadlarik]

I'm using the stock Huawei ONT router from stormfiber

so it is only a 2.4ghz device, try to change channel width to 20mhz. if not then try to manually select a clean channel. in advanced wlan settings of router.

 

[muhammadsauud]

so it is only a 2.4ghz device, try to change channel width to 20mhz. if not then try to manually select a clean channel. in advanced wlan settings of router.

Like I said bro, have tried almost every different settings and still this shit completely lost connectivity on all devices an hour ago, when I open wifi analyzer it showed another new SSID on the same channel but far away and it's almost 25 feet from me and still wouldn't connect, somehow managed to changed the channel. This crap is the worst router I've ever used for wifi connectivity

 

[Thugnificent]

Make a hotspot on your phone and see if it drops that wifi connection. If it doesn't that means Router is the problem, replace that then. If it still drops i guess it's the wifi card.

 

[Simonsayz]

I'm using the stock Huawei ONT router from stormfiber

Get the Asus AX86U if it's in your budget, otherwise AC68U at the minimum. Don't go for any other brand than Asus. Only step up from Asus would be Ubiquiti.